- A+
Brother Printer 2240 Toner Still Lit After Reset
Brother printers are some of the most reliable and efficient printing machines available on the market today. However, like any other printer, they can experience some technical issues that may require your attention. One of these problems is when your Brother Printer 2240 toner light remains lit even after resetting the printer. This article will discuss some reasons why your printer's toner light might stay on and how to fix it.
Reasons Why Your Brother Printer 2240 Toner Light May Remain Lit
Several factors may cause your Brother 2240 printer's toner light to remain lit even after resetting it. Here are some of the most common reasons why:
The Toner Cartridge is Not Installed Correctly
If your Brother Printer 2240 toner light remains illuminated even after installing a new cartridge, it could be because the cartridge is not correctly installed. Check the installation manually and ensure that the cartridges are correctly positioned.
The Toner Cartridge is Empty
Besides incorrect cartridge installation, it could also be that the cartridge is empty or low on toner. Try replacing the toner cartridge with a new one and check whether the toner light goes off.
The Printer is Not Reset Properly
Resetting a Brother Printer 2240 printer is easy. Press the 'Go' button seven times, and the printer is reset. However, if the toner light is still on after the reset, it could be that you were not successful in resetting the printer. Try resetting the printer again to see if it works this time.
Printer Drum Needs Replacing
The printer drum is responsible for transferring image and toner from the cartridge to the paper. If the drum is deteriorating, fading, or showing signs of wear and tear, it might be time to replace it.
How to Fix Brother Printer 2240 Toner Light from Staying Lit Even After Reset
Now that you know the primary reasons why your Brother Printer 2240 toner light may stay on even after resetting, here are several methods you can use to fix the issue:
Clean the Printer
Use a soft lint-free cloth to clean the printer's exterior. Ensure to remove all dirt, ink stains, and debris from the printer, including the toner cartridge area.
Remove the Toner Cartridge and Shake It
If the cartridge is not empty, take out the toner cartridge and give it a gentle shake. Doing this helps to redistribute the toner in the cartridge evenly. After shaking the cartridge, reinstall it and see if the toner light goes out.
Replace the Toner Cartridge
If the above methods do not correct the problem, replace the toner cartridge with a new one. A new cartridge should correct any problems with the old cartridge, and the toner light should go out.
Using the Printer Maintenance Mode
Brother Printer 2240 comes with a maintenance mode that can be used to fix some printer issues. To enter the maintenance mode, press the 'Go' button seven times once the printer is on and leave the button. The printer should be in maintenance mode now. Press the button three times, and the toner light should turn off.
Conclusion
The Brother Printer 2240 toner light remaining lit even after resetting could be frustrating, especially when you need to use the printer urgently. The good news is that you can fix the issue by following the tips shared in this article. If the above methods do not solve the problem, your printer's issue might be more complex and require expert help.
